It’s surprising how your window tracks can quickly get filthy. Moreover, there are always deposits of nasty dirt in nooks and crannies that you can’t seem to loosen up. Such a terrible experience! Then a quick and effortless way to clean window tracks and remove mold is indeed a savior.
This article would like to share the easiest step-to-step guide to clean window tracks and remove mold so that your windows will shine remarkably in just a snap. Why don’t you check it out!
Table of Contents
- How To Clean Window Tracks And Remove Mold
- Pro Tips For Cleaning Window Tracks And Removing Mold.
- Tips For Preventing Mold From Coming Back
- Let’s Recap
How To Clean Window Tracks And Remove Mold
Are you tired of spending a large amount of money hiring professional cleaners to keep your windows in good condition? Complete it yourself! Here is how to finish it in minutes.
Before getting started, you should grab the following notes first. Don’t worry! This task requires no fancy equipment. You need several items available in your house, and that’s all.
- An old toothbrush or a sponge
- Sharp objects: q-tips, toothpicks, or a butter knife
- Paper towel
- Spray bottle
- Vacuum cleaner (if any)
- Personal Protection Equipment: goggles, gloves, face mask (when you have to use chemicals)
- Baking soda
- White vinegar
- Dish detergents
How To Clean Window Tracks And Remove Mold
Step 1 – Remove Loose Debris
The first rule is to open the window and let the wind freely flow! You probably don’t want the dirt you take times to loosen falling back into your home, do you?
Next, use a toothbrush or a sponge to break up debris accumulation between the tracks.
You should use a vacuum cleaner to extract debris as much as possible. The device can work just as well. Maybe you might still have to wipe away the hard dirt afterward, but it can help deal with big dirt, dead bugs, or dried leaves.
Step 2 – Tackle Hard Stuck-on Dirt
Scoop a few teaspoons of baking soda, sprinkle it over the tracks, and make sure it covers your tracks entirely.
Create a mixture of vinegar, water, and a few drops of dish detergent in a spray bottle and shake it well. Then spray the solution on top of the previous baking soda layer. You should spray from the corners to the center.
Baking soda and vinegar help remove stains, even the most stubborn ones.
Now, wait for approximately 5 minutes until the mixture works and bubbles.
Step 3 – Scrub
Don’t be discouraged. This step doesn’t take you much effort because the chemical mixture above will help. You only need to grab the toothbrush again, rinse it, and gently scrub at the tracks’ surfaces. You soon can see with your naked eyes that the amount of stuck-on dirt is significantly reduced.
You can use some sharp objects prepared to clean tight places that are out of reach of the toothbrush. Toothpicks or q-tips are ideal; however, you can also wrap the butter knife with the rag or fold the paper towel to fit the corners as alternatives.
Step 4 – Remove Mold
This step applies only to cases of detecting mold growth on window tracks.
Wear your protection equipment to avoid touching dangerous spores from the mold.
Next, scrub the mold off the tracks using the mixture of bleach and warm water in a 1:3 ratio. Finally, wipe away loosened mold and the residue with a clean rag.
Step 5 – Wipe Away The Dust
Use the rag or paper towel to give the tracks’ surfaces one last wipe to get rid of the dust. Spread some paper towels out and press them on the tracks to absorb any remaining vinegar and dirt. Don’t forget to wipe the surface with wet rags one more time, and finally, use dry towels to finish the process.
And you are done! Enjoy your squeaky clean window tracks!
If you feel that your window tracks are not clean enough, you can repeat the process. It won’t take too much of your time.
Pro Tips For Cleaning Window Tracks And Removing Mold.
- Clean your window tracks at the proper time: no direct sunlight. Cleaning when there is enough sunlight will help dry the tracks quickly, but that unexpectedly leaves residue behind. You certainly would never want your cleaning to be a wasted effort when there are so many visible spots and streaks left.
- Consider cleaning your window tracks biannually. The main reason for turning cleaning window tracks into a tedious job is people’s habit of letting the dirt accumulate for years. It then takes you hours to tackle stubble, caked of gunk, dust, dirt, your pet fur, and who knows what else!
- Remember to clean all vertical and horizontal tracks. Some people tend to clean just easy-to-see tracks. However, having a window in good condition will save you tons of money on damaged grooves or broken glass repair bills. Just a little more patience, and your effort will undoubtedly bear fruit.
- You can combine your daily house cleaning with window tracks wiping at the same time. In this way, you can sweep away the dirt as soon as you remove it from the tracks. This tip will make it easier to clean the tracks because you won’t have to deal with stubborn dust that builds up over time. At those times, just disinfectant wipes or paper towels can remove dust without leaving any harmful chemicals behind. Health protection is a prerequisite.
- Avoid mixing bleach with any cleaning chemicals when removing mold. Give up the idea that mixing one substance that works well with another one will make it even better! Chemical reactions will take place, and those who are not knowledgeable will suffer the consequences. In our case, mixing bleach with vinegar or rubbing alcohol is a bad idea. For vinegar, not only does this mixture not create a power disinfectant, but it also produces chlorine gas that will cause shortness of breath, coughing, and even burning. The same goes for rubbing alcohol when the mixture can be extremely toxic and irritating.
- Should not think of spraying an oven-cleaner to get rid of the hard stuck-on dirt. Oven-cleaner is especially hazardous. It contains some pretty serious and harmful chemicals to deal with the residue and burn the charred food away. This harsh chemical can even wash off your window paint with just a slight wipe. It can also harm you with symptoms all over the body, such as having difficulty in breathing, vomiting, losing vision, suffering severe pain in the throat and other parts, etc. Icky hard dirt is a nuisance, but it’s not worth risking your health by using that kind of chemical.
- Do not use too much baking soda and vinegar if you do not want to endure the nasty smell emitted from the tracks and have to find a way to get rid of it.
Tips For Preventing Mold From Coming Back
Mold is a nightmare with most people because it keeps recurring even when you have done everything you can to get rid of it. It was indeed an unpleasant experience, not to mention the unexpected symptoms of chronic mold exposure.
With those who are having a hard time finding some tricks to prevent mold from returning, this part is for you. Damp, warm places are ideal for mold growth, so the best solution to keep it away for good is reducing the amount of moisture in your house, especially the area near the window.
- You should maximize the amount of ventilation throughout your house by opening your window if the weather is not too cold.
- You can move the houseplants away from the window as it requires humidity indoors that lead to mold growth.
- If your finances allow, affording a dehumidifier is not a bad idea. It keeps humidity levels down and minimizes the likelihood of unwanted allergens such as mold, mildew, and other bacteria.
Discover more about remove mold from Silicone Rubber here!
Take cleaning the tracks into your consideration right now. You probably do not like the feeling of opening and closing the window with all your might because of layers of grime and dust. Luckily, with our easy-to-do way to clean window tracks and remove mold, you can avoid this situation without spending much effort.
Besides, to keep the tracks in tip-top sparkle shape and free of mold, you should consider cleaning them once every two weeks. All the best to your cleaning!