The comb is one of the essential items of many people in everyday life because it helps you take care of your hair and create stylish hairstyles.
The habit of keeping your bristles clean, however, is often forgotten. But don’t you know that this habit is essential because the remaining oil, dirt, dandruff, and hair products on them will pass on to your loved one, be it roommates or your spouse when sharing?
Moreover, an old hairbrush can be reusable and prolong its life by removing the remaining on it. Nonetheless, many people don’t know how to remove lint from hairbrush.
Hence, our mission here is to show you the effective ways to make it clean and prolong its lifetime.
Let’s get started!
Table of Contents
- Why is There Lint in The Hair?
- Why Do You Need to Remove Lint from A Hairbrush Regularly?
- How to remove Lint from Hairbrush?
- How to Avoid Lint Clinging on Hairbrush?
- In Short
Why is There Lint in The Hair?
There are many causes of your hairbrush sticking to lint. Here are some of the most common reasons you should be aware of.
Dead Cells from The Scalp
You probably don’t know, but the scalp’s dead cells aren’t quite lint yet. Failure to exfoliate your scalp frequently or wash it poorly will cause these lints to come off and stick in your hair. Consequently, when you brush your hair, it sticks to your hairbrush.
One factor causing lint is dry shampoo. Dry shampoo is indeed so convenient and useful in temporary hair cleaning. However, everything has two sides, and dry shampoo can not escape from this rule. The disadvantage of this kind of shampoo is it quickly makes your scalp to flake, which results in the appearance of dandruff and lint.
Residue from Makeup Products Like Sprays, Creams, and Powders.
One thing you may not pay much attention to is the remainder from cosmetics such as powders, creams, and sprays may contain lint substance. These substances can stick to part of your hair. So, clean your hair carefully after finishing makeup!
Fibers from Hats, Headband, or Hair Ties
For people who often wear hats, headband, and hair ties, the main factor causing lint is fibers from these hair accessories. Therefore, you should wash them regularly to avoid lint clinging on your hairbrush.
Why Do You Need to Remove Lint from A Hairbrush Regularly?
As mentioned above, the hairbrushes come into contact with dirt, dead skin, oil, or hair loss on your head every day. Over time, your comb will accumulate countless bacteria that are hard to see with the naked eye.
If you continue to use the dirty brush, you may experience hair problems such as dandruff, scalp fungus, hair loss, or scalp inflammation. Contaminated combs are also the cause of your hair becoming oily, accompanied by an unpleasant odor.
Therefore, it is better to clean them regularly, about 1-2 times/week, to prevent harmful bacteria for hair and scalp.
How to remove Lint from Hairbrush?
Step 1: Untangle Hair
If your hairbrush only sticks to a thin layer of hair, just use your fingers to remove it. The fingertips are usually flexible, so you can efficiently handle them without paying for additional tools.
After removing hair from one end of the comb surface, gently pull the hair outward. Be patient at this step because the strands of hair are very fragile. If in a hurry, you can make it harder to remove.
With Hair Removal Tools
If there is a tight layer of hair on the hairbrush, use a hair removal tool. When it comes to hairbrush cleaning, hair removal tools are always at the top of the list. Although the device looks like a comb, it is much more useful.
Hair removal tools are also available in various sizes and are also available in single or double-sided. For a hairbrush, you should choose to buy a two-sided untangle hair removal tool for flexible use.
With Teasing Combs
A teasing comb usually has one end with the comb teeth, and the other pointed tip is used to turn the throne. You put the comb’s tip underneath the top layer of hair and gently pull it out of the comb.
Repeat this practice on the remaining edges of the comb or the entire comb surface. When the hair is no longer attached to the surface, simply use your fingers to curl it up.
Step 2: Clean Dirt and Oil on The Hairbrush
Use Tea Tree Oil
Tea tree oil is a very effective and natural cleanser that can be found in most cosmetic stores or supermarkets. First, you need to pour 1 cup of warm water into a medium-sized bowl. Then add a few drops of tea tree oil and stir well.
Use Baking Soda and Shampoo.
For sensitive or allergic skin, using shampoo in combination with baking soda is a safe and gentle option. You need to pour 1 cup of warm water into a medium-sized bowl. After that, add a teaspoon of shampoo and one teaspoon of baking soda and mix.
Use a Toothbrush to Scrub
It’s time to use a clean toothbrush and dip it in the solution. Make sure the bristles of the brush are all absorbed with the cleaning solution.
Next, use a toothbrush to scrub the comb’s surface, where the bristles are attached, from bottom to top. This action will help remove excess oil, dandruff, and hair products.
Then, move the brush one after another to scrub the entire surface. Be sure to wash in small circles to remove stubborn dirty combs.
Soak the Comb in the Detergent Solution for a Deep Cleaning
After rubbing the hairbrush’s surface, you will dip the tip of it into the cleaning solution. This helps to remove any residual dirt and to clean the comb one more time. This is a helpful step to remove remaining stubborn hair products from the hairbrush.
However, if your hairbrush has a wooden handle or comb end surface, do not soak it in water. Most wood combs are coated with a waterproof cover but are not 100% waterproof. Instead, use the brush to scrub the hairbrush just once or twice.
Rinse with Plain Water
You should take one more medium-sized bowl for clean water. Slowly bring your hairbrush down to the bowl of water to soak the bristles all over. Or you can use a spray bottle to spray water over the strands until the water is clear.
Step 3: Dry Hairbrush
Use a Clean, Dry Towel
It is crucial to dry the remaining water on the hairbrush quickly, or the wooden hairbrush ends. Residual moisture can get into the bristles, comb ends, and the wood material, causing mold growth and damage.
Next, use a towel to gently press between the bristles to touch the surface of the comb. Make sure to use moderate force to absorb the remaining water.
Once the water on the hairbrush has dried up, the next important step is to dry the comb before use. Place the bristles on a clean, dry towel and let them dry overnight.
Use the Dryer
If you need to use the hairbrush right away, use the dryer on the lowest setting to make it dry faster. You had better move the dryer back and forth on the hairbrush several times to blow dry the excess water. Also, make sure it is slightly damp instead of soaking wet.
How to Avoid Lint Clinging on Hairbrush?
Lint is very easy to stick to the hairbrush, so you need to take measures to avoid it. You can apply one of the following.
Cleaning the hairbrush regularly is the easiest way to practice. You just need to spend about 30 minutes per cleaning to have a clean hairbrush.
Use Cap When Sleeping
Most lint comes from the pillowcases. Therefore, one solution to prevent fibers from them is to use sleeping caps when you sleep. This way helps lint not cling much on your hair.
Change and Clean Pillowcases Regularly.
If you don’t like wearing caps when sleeping, you should change and wash your pillowcases frequently. This way prevents lint from falling out and sticking on your hair.
The above is the most effective way to solve your problem: how to remove lint from hairbrush? Actually, cleaning the hairbrush is not as difficult and complicated as you think. You only need to spend about 30 minutes each time, and you will have a hygienic comb for your healthy hair.
You can clean it whenever you want. But make sure to take the steps above to give your hairbrush a longer lifespan. Wish you success with the above steps!