Wood is not only good looking but also long-lasting. That is why interior architects prefer it in designing gateways. However, this raw material can quickly lose the glossiness.
Fortunately, as long as you know how to clean and polish wood doors, your house will always have an alluring look. Follow my post for more details on restoring your wooden facilities in this autumn.
Table of Contents
- How To Clean And Polish Wood Doors
- How To Clean Wood Doors
- The Initial Step: Dusting
- Using Mild Soap To Do The Overall Cleaning
- Clean The Edges, The Handles, And The Hinges.
- A Guideline To Remove Stubborn Stains
- Diminish Grease Stains
- Remove Old Paint In Many Ways
- Use A Steam Cleaning Machine To Handle Grimes
- Cleaning White Painted Wood Doors
- Cleaning The Carved Wood Doors Is A Challenging Task
- How To Polish Wood Doors
- How To Clean Wood Doors
- In Summary
How To Clean And Polish Wood Doors
How To Clean Wood Doors
Cleaning is the first approach to refresh the appearance of any fitment.
The Initial Step: Dusting
Everything in your house accumulates dust in just days. There is a significant amount of dust on the admittance, as it always exposes to the outside. Spider webs are also inevitable because entries are often located at the corner of the rooms.
However, you can clean it easily and quickly by dusters or brushes. Just use your domestic brush to sweep the door from top to bottom and from the hinges outwards, and you are good to go.
In particular, please pay your attention to the grooves because they can become the dormitory of insects such as cockroaches, ants, termites, and weevils.
Choosing a good duster is essential as well. An extended grip will help you to reach different angles. Microfibers, cottons, and feathers are promising materials that can capture dirt productively without spreading it around.
Please avoid nylon brush as its rough texture can scratch the thin paint layer of the adit. Moreover, you have to clean the duster itself; otherwise, it will bring the old dust back to the gate. There are many commercial dusters which are removable from the wand and washable.
Using Mild Soap To Do The Overall Cleaning
Mild soap is a convenient yet effective way to clear the entry. You can use a homemade soap mixture to clean the small, reinless stains. They usually are the residue dirt that the dusters can not wipe out.
To begin with, prepare a mild cleanser, including dishwashing soap and warm water. The ratio is half a tablespoon of soap per one water cup, a very watery mixture compared to regular cleansers. Next, you will need a soft sponge to swab the visage.
The actions are the same as using a duster: Wipe the entrance from head to foot. The remarkable point here is to squeeze out the residue water in the clout before cleaning the wood.
The fabric should be damp enough but not soaking wet because too much water can make the wood swell. Finally, mop the door with a dry towel or place a fan near the entrance to avoid excess dampness.
Clean The Edges, The Handles, And The Hinges.
People can easily ignore the edges, handles, and hinges, yet those areas are very susceptible to grime. Overall, the dirt stick in there is not only thicker but also tricky to handle. Firstly, re-creating the soap mixture in a more potent consistency. I suggest a ratio of 1:5 for soap and liquid.
Secondly, you can use a rough rag to wipe those places starting from the top edges. Next, clean the hinges thoroughly because those metal joints may permanently affect the entryway once they get rusty. On the other hand, you should obliterate the wood around the handle gently.
I suggest using a sanitizing spray. In case you use metal polishing cream on the handles, make sure to cover the wooden part around because the cream may not be wooden-friendly.
A Guideline To Remove Stubborn Stains
In reality, you may confront more problems than just the natural deterioration. For example, your children can accidentally leave some colorful drawings on the door. Just chill! I will illustrate how to clean all those paints right away.
First of all, buy a paint thinner whose commercial name is mineral spirits. This potent solvent can dilute oil-based paints quickly. After wearing rubber gloves, drip this solvent carefully to a clean cloth then swab it on the painting stains only.
Do not swipe this solvent all over the places, or else it will ruin the wood’s original polishment. Be careful when working with it from the top because it can drip down the floor. You have to obey the instruction by using a little solvent at a time.
Lastly, clean the facility again with a dry towel to remove any residual chemicals. At the same time, use a fan or a ventilating machine to discharge the smell. In general, this method is also useful in treating other stains such as stubborn rush or turpentine.
Diminish Grease Stains
Removing grease stains requires extra steps. First, pat a dry kerchief or tissue paper to blot the oil on the surface. Do not pull the fabric back and forth so as not to spread out the grease.
Alternatively, a handful of sand, coconut husk, or any oil absorbance in the market can help you soak the excess oil quickly.
The second stage is to clean the gate by using cleaning solutions. Combine equal parts of vinegar and water, then apply this homemade solution on the grease stain. You can also use the mild soap mixture instead. This process may take you extra time as the grease stain is difficult to erase.
You have to leave the solution on for at least five minutes to absorb the oil. Then, wipe the cloth gently several times until you see the result. After that, dab the grease stains for the last time with a dry rag.
Remove Old Paint In Many Ways
When the old paint layer sloughs or becomes moldy, it is time to consider removing it. The most available option is to use coarse sand to rub that old layer away. Besides, abrasive paper also brings the same result in this case. However, it is a very time-consuming task and tiring, especially for a vertical place like doors.
Do not be frustrated. You can rely on another professional choice which is using chemical strippers. Effective as well as time-saving as it may sound, there are still many pitfalls. For instance, it requires a ventilative working area due to harmful accumulations of harsh chemicals.
Thus, you have to remove and bring the internal door to the yard. However, you can execute this procedure for exterior doors conveniently.
In the beginning, apply a thick layer of peeling liquid onto the exit. You have to wait for the chemicals to activate. This progress may take hours, depending on different brands. Once dissolving the old paint layer, scrape it out of the surface using a shoving tool.
Use A Steam Cleaning Machine To Handle Grimes
Until now, I have introduced you to a variety of cleaning methods that utilize sanitizers and soaps. Many people believe that the combination of those heavy chemicals and a lot of water can damage the wood.
If you have the same concern, please try using a steam cleaning machine, which in my opinion, is more effective than the rest. In the dry steaming process, the engine uses a minimal amount of water and no chemicals.
The thick towel covering the steaming head insulates the overheat on the wood. Meanwhile, the steam pressure vacuums dirt like a magnet. You have to control the temperature so as not to damage the wood. The tip here is to observe the cleaning process and stay at medium heat only.
Move the steaming mop along with the entryway. The telescoping pole is always adjustable so you can reach the top of the fittings effortlessly. Once completing the cleaning, remove the mop and throw it in the washing machine, and it will be ready for the next cleaning day.
In my opinion, a steaming machine ranks the most effective and expedient in cleaning wood doors.
Cleaning White Painted Wood Doors
Light-colored wood furniture has been trending in interior designs for the past five years. The pastel tone brings an elegant and romantic atmosphere to the wood material which is considered as old-fashion.
However, it is hard to keep the white painted wood always shining and flawless. You have to be aware that the bright tone is easy to discolor. It will help if you plan to clean the door more frequently, starting with dusting.
The gentle soap mixture is ideally suited for this situation as well. You can sterilize the door with a soft textile and a minimum amount of liquid soap.
Even when the soap can not give you a noticeable result, avoid heavy chemicals, namely acetones, spirits, alcohol, at all costs. Their bold reactions will ruin the susceptible paint layer. Nonetheless, you can use those products in case you aim to re-paint the door all over.
If there is any thick dust sticking tightly onto the countenance, please do not scrape it out by sharp tools. Instead, use a steaming machine whose pressure will soften and force the dirt out.
In my experience, prevention is better than treatment. Polishing your bright painted doors with a high-quality layer of antifouling polishment is the ultimate scheme. Furthermore, make a schedule to re-polishing the door every other month.
Cleaning The Carved Wood Doors Is A Challenging Task
In many Asian countries, carved wood doors are symbols of not only artistic but also prosperity and fortune. The patterns carved on woods are incredibly intricate and fussily. Hence, they are easy to accumulate dust and excess rainwater, especially in the case of exterior doors.
Initially, you will need a little bristle brush, which is merely the size of a toothbrush. You will find it easy to slip into hundreds of ornamental molding. You should choose a long feather type of brush as it is very smooth and flexible.
Wriggle the brush through the indentation and spin it to attract dust inside. You can do the same technique with a thin tablecloth. Add soap water to dampen the fabric and drag it through the holes to swab the dust.
I prefer a dozen disposable wet tissues to one single cloth to avoid spreading dust after every wipe. For small and in-depth details, you can try a thin cotton swab for your convenience.
In reality, there are many professional tools to clean the carved patterns. My favorite is a long pointy stick whose end is covered by feathers. It is an extended version of a standard cotton swab. Your chores will become effortless thanks to this creative tool.
Another option is to use an air blower. From my perspective, this is the most efficient method to clear the dust out of the carved details. Put the blower at medium level and direct it alongside the door.
The mighty wind will force the dust away even if they hide in small holes. This method also has other advantages as it dries the excess rainwater stagnates in the deeply carved patterns.
Even though using an air blower is well suited for cleaning texture wood, it is inconvenient and expensive as not many households already own this type of device.
How To Polish Wood Doors
Traditional Method: Using Oils
In the first stage of the process, you have to remove faults and blemishes to enhance the wood quality. If you encounter a rough and grainy surface, you have to smoothen it with coarse sandpaper and then rub it again with a finer grit.
A smooth texture will absorb the oil better and bring out the shining visual effect. Afterward, brush out any dust produced in the rasping process by using a napkin. Do not use wet cloth because, unlike the cleaning process, we do not require water in applying polishment.
The second stage is sealing. You can easily buy a variety of pre-mix sealers in the supermarket or tool store.
Read the instructions carefully to choose the appropriate product for your door. Otherwise, you can confuse it with the one made explicitly for wooden floors and ceilings. A soft brush is ideal for applying sealer in vertical lines and followed by horizontal lines.
Once the sealer is dry, continue sanding and cleaning the exterior to prepare for the next layer of sealer. The good woodworker usually applies between two and four layers of sealer to make the surface flawless.
The third stage is to apply polishment. Conventionally, linseed oil, shellac, or lacquers are preferable. In this post, I will illustrate the easiest way to polish wood- the padding technique. You need to soak a cotton ball into linseed oil and place it in another napkin.
Fold it to create a tight pad. Flatten that cotton pad, so the surface is firm and wrinkle-free. Swipe it on the wood following a continuous motion until it covers the facet entirely. You can overlay the polishment three or four times to get the best finish.
Using Beeswax To Polish Wood Doors
Do you know you can use beeswax as a natural yet effective polishing material for your wooden furniture? It is a cheap product that you can easily find in any local store.
You can mix the beeswax with minerals oil at home or acquire many defined formulas on the market. The substance of the beeswax is different from standard polishing oil. You have to keep it warm and scoop out on your textile.
After cleaning and mài mịn the surface, apply this wax in a circular motion, just like how you work with oils. Owing to the thick consistency, you may find some excess wax in the polishing process. Do not panic! Just quickly wipe off the residue before it hardens.
It takes 15 minutes for the wooden door to fully absorb the new wax. Repeatedly, prepare to put on another layer once the wooden doors fully absorb the wax.
Unlike the typical oils, which require a ventilator to reduce the potent smell and chemicals, you have to cure the beeswax in a warm room for a day. Luckily, this polishing paint secrete a beautiful fragrance and no harmful toxins.
Using Faux Wood Polish For Fiberboard Doors
Instead of monolithic wood? The original wooden material always presents beautiful wood grains. However, it is costly and hard to find as the government forbids the exploitation of scarce timber trees, namely pines, rosewood, and teak.
On the other hand, fiberboard is affordable, and you can make it look like hundred-year-old oak wood by applying faux wood polish.
Before painting the faux wood, you have to rub the surface smoothly. After that, paint a thick layer of wood color on top. When the paint is still wet, roll the wood-grain-carved roller following by brushing from top to bottom.
This additional brushing step will create natural veins. Next, you can apply a darker tone paint as your choice. Finally, add a few glaze layers to increase the wood door’s glossiness and preserve the painted patterns.
As shown above, there are many ways on how to clean and polish wood doors. It seems to me that there is nothing as the best choice among the others. It all depends on which type of doors you use as well as the availability of household tools.
Nevertheless, you certainly can combine many techniques to gain the best result.