Wood floors are a durable and beautiful asset to your home because of its richness, warmth, and resale value. However, your laminate flooring is susceptible to stains and may be difficult to reduce and eliminate. Besides, woods also create cracks if they are absorbent.
Cleaning your parquet floors without fading and breaking their structure is an important issue. Can you clean wood floors with bleach? What happens when you use detergent to clean your laminate flooring? Do not worry! This article will help you answer all of your questions. Check it now!
Table of Contents
- Can You Clean Wood Floors With Bleach?
- What Happens When You Use Bleach Strong To Clean Wood Floors?
- What Is Kind Of Bleach Suitable For Wooden Floors?
- What Factors Influence Bleach Penetration To Your Wood Floor?
- Are There Any Cleaning Solution To Replace Bleach?
- In A Nutshell
Can You Clean Wood Floors With Bleach?
The answer to this question is yes, but bleaches are not the ideal and safe solution for your wood floors because of its strong oxidizing properties. The bleach can penetrate the porous fibers, disrupt the wood’s finish, weaken and discolor the floorboard’s structure.
Therefore, if not absolutely necessary, you should use a cleaning solution that acts as bleach without affecting your wood floors. In case you have to use bleach to clean the wood floors, be careful not to use concentrated bleach but dilute with water in a certain proportion.
We insist once again, we do not recommend using bleach to clean your wooden floors, and in certain cases, you must dilute them with water.
Wood’s hardness and durability is a key factor in determining how bleach will affect your floors. The harder and durable woods, the harder it is for bleach to penetrate deep inside. In addition, the woodworking process also affects the bleach’s penetration ability.
The more carefully machined and processed your laminate floor is, the harder it is for bleach to permeate inside. However, asking yourself if it’s worth the risk before using it.
Besides bleaches, it would be best if you never use a mop with hot water or even steam cleaner or steam on your laminate flooring similar to bleach. Steam can damage your floor because it can penetrate the voids of the wood.
What Happens When You Use Bleach Strong To Clean Wood Floors?
The strong bleach can break down the bonds in your wood structures, which are made of lignan, damage the structural integrity of floors, and create squeaky noises.
Therefore, we do not recommend using bleach to clean the floor, and if so, make sure you diluted it and know the undesirable effect that detergent has on your wood floor.
In bleach, an active ingredient is a highly reactive substance and corrosive, called sodium hypochlorite. It kills viruses, fungi, bacteria, and alters colors. The bleaches will change the molecule’s composition when they come in contact with any color. For wood floors, bleach also has a similar lightening and whitening effect on hair and clothes.
Because of bleach’s ability to discolor and weaken the wood texture, we recommend that you should use alternative cleaning solutions and only use bleach when absolutely necessary.
What Is Kind Of Bleach Suitable For Wooden Floors?
There are currently four popular bleaches on the market: non-chlorine bleach, two-part bleach, chlorine bleach, and oxalic acid. Let’s take a look at their active ingredients to determine which bleach is less dangerous for your wood floors when using.
Non-Chlorine Bleach is the type of bleach that uses oxygen as its active ingredient and comes in a liquid or a powder form. This bleach is more environmentally friendly than another bleach, is also less toxic, and does not fade your laminate flooring color. However, compared with Chlorine Bleach, the sterilization capacity of non-chlorine bleach is not as strong.
Two ingredients mentioned in this type of bleach are hydrogen peroxide và sodium hydroxide. These ingredients combine to remove the stain; at the same time, they can also fade your wood floor’s color.
Chlorine bleach is the most common detergent, releasing chlorine radicals and oxygen radicals, making molecules formed of one oxygen and one chlorine atom. It is best for removing problem stains and dyes.
Compared with other bleaches, oxalic acid has weak reducing properties, but it is useful for cleaning stains.
Two-part bleach, chlorine bleach, and oxalic acid are all corrosive and can clean your wooden floors. However, these bleach types change the color of your laminate flooring by breaking the bonds of pigment cells in the woods, thereby changing how they reflect light.
Compared to the three above bleaches, the remaining bleach – non-chlorine is not as effective as disinfecting, but it is environmentally friendly and less toxic. Summary, if you need to disinfect your wood floors, let’s begin with oxalic – the mildest form.
What Factors Influence Bleach Penetration To Your Wood Floor?
There are many factors that determine how well bleach can penetrate your laminate flooring, such as concentration of detergent, wood floor’s age, finishes, etc. From these factors, you can minimize the chance of bleach entering and damaging your laminate flooring.
You should use a diluted cleaning solution to clean a small area and make sure the bleach does not interfere with your wood floor.
Concentration of Detergent
Bleach concentration is an important factor that directly affects your wooden floors. They can affect the laminate flooring’s texture, as well as determine if your floor is discolored. Therefore, only use diluted bleach when cleaning the wood floors with a recommended dilution ratio of five tablespoons of detergent per gallon of water.
Wood Floor’s Age
Newly installed floors break down lower than older wood floors. In addition, natural wood will show signs of wear and tear over time and should be repainted periodically to prevent damage caused by bleach.
Surface Finishes and Penetrating Finishes
Surface finishes, also known as surface topography or surface texture, transfer layer formation during sliding and control friction. Some types of surface topography can prevent your wood floor from absorbing bleach, such as polyurethane.
If your wood floor has these surface finishes, they are more resistant to bleach. These surface finishes are most notably meant only partially to prevent the detergent from going deep, not all.
Penetrating finishes are not resistant to bleach as much as surface finishes; this means that laminate flooring containing surface finishes is more susceptible to bleach damage than wood floor having penetrating finishes.
Are There Any Cleaning Solution To Replace Bleach?
Cleaning Solution To Replace Bleach
- Clorox Disinfecting Wet Mopping Pads: This is a disposable wet mopping pad produced by Chloraz, which kills and disinfects 99,9% of bacteria and viruses, safe for your wood floors, and bleach-free. You only attach it to the mop head, clean your floor, and let it air dry.
- Black Diamond: This is a cleaning solution to replace bleach, safe on types of wood, eco-friendly, easy to use, and promises a spotless shine.
- Pledge: Similar to Black Diamond, Pledge is a safe and popular product with a signature lemon scent. You do not need to waste time diluting it with water, Only point the pitcher at your floor’s surface, press, and swap.
- Rejuvenate: This is a floor cleaning product exclusively for wood that is non-toxic, bringing back shine and filling in scuff marks. Besides, this product also effectively removes stubborn stains without damaging your wood floors.
- Bona: Bona cleaner is rated as the best floor cleaning product voted by Good Housekeeping. It is safe, dries quickly, and it’s easy to use.
The above products are all safe and trust for your laminate flooring, recommended by the manufacturer. You can also buy them on Amazon, supermarket, or retailer near your home.
How To Clean Wood Floors Without Bleach And Cleaning Solution?
Use a Tennis Ball or Eraser:
When you drag furniture and walk with rubber-soled shoes across your wood floors, they will create some unsightly scratches. You can get rid of these scuff marks by rubbing them vigorously with a tennis ball or an eraser.
Water and Dish Soap:
You can use clean water and dish soap to remove oil and grease stains. Here’s how to do it: mix water with a little dish soap, and rub the stains with a cloth in a circular motion. In dishwashing liquid, containing surfactants, which break down the molecules in oil, grease, and remove it from your laminate flooring’s surface.
Vinegar can remove pet stains clearly from your laminate flooring, but it can also damage your flooring. Therefore, you must be careful when using vinegar and use only a 4:1 ratio of water: vinegar; this means four parts water and 1 part white vinegar.
Then, prepare a cloth, dip it into the above mixture solution, and clean the pet stains area. Next, drying this area, sprinkling a little baking soda on it, and waiting for a few hours. Last, using a damp cloth to clean up the baking soda and drying this area again with another clean towel.
One trick when your wood floors get chewing gum: hold the gum firmly with ice cubes until it turns rock-hard. Then, you can use a plastic knife or spatula to shred the gum easily.
In A Nutshell
Can you clean wood floors with bleach? Yes, but we do not recommend cleaning your wood floors with bleach. In special cases, let’s use a diluted bleach solution and pay attention to factors that affect bleach’s ability to penetrate your wood floor.
Bleach has strong oxidizing properties, and when they get inside the wood cell, destroying the wood’s structure and discolor your laminate flooring.
To avoid unnecessary problems caused by bleaches to your laminate, you can use alternative cleaning solutions, which are recommended by reputable suppliers, such as Bona, Rejuvenate, Pledge, Black diamond, Clorox, etc.